Air Compressor – Features You Need To Know Before You Buy

Air Compressor - Features You Need To Know Before You Buy

An Air compressor is a device that can increase the pressure of a gas by reducing its volume. These devices are similar to pumps. Their work is to increase pressure on a fluid. They can also transport the fluid through different pipes. If you’re in the market for an air compressor rental in UAE, there are a few features that you should be aware of. These include CFM rating, duty cycle, size of the tank, and sound-dampening materials. Knowing these details will help you make the right decision.

CFM rating is the air compressor’s flow rate:

A CFM rating is a unit of measurement that measures the amount of air a compressor can move in one minute. It is also known as the SCFM (standard cubic feet per minute). The CFM rating is less precise than the SCFM because it is calculated at a higher pressure, which means that the air volume is smaller. However, the CFM rating can be used to determine the size and type of an air compressor based on its intended use.

Duty cycle:

When using an air compressor, it is important to know the duty cycle. It will determine how long the engine can run continuously without a break. When the duty cycle is exceeded, it can cause the compressor to malfunction, and in extreme cases, the piston may seize in the piston housing. This can cause the engine to shut down. However, the duty cycle is rarely the root cause of an air compressor problem.

Size of the tank:

The tank size of an air compressor is an important factor in determining the amount of air it can supply. The bigger the tank, the more air the compressor can supply to your tools. However, if you plan to use the air compressor for sustained tasks, a smaller tank will likely not provide enough reserve air. A large tank is more efficient for sustained tasks, like painting cars. However, it is important to remember that the tank size should be proportional to the amount of air you need.

Sound-dampening materials:

Air compressors can be noisy, but if they are built with sound-dampening materials, they will be much quieter. Typically, sound-dampening materials are either acoustic panels or foamboard. These can be installed on the compressor room’s walls and effectively reduce noise. The materials must allow for adequate airflow around the compressor and must be installed so that they do not interfere with the heat-producing machinery in the room.